#include <DHT.h>
#include <ESP8266WiFi.h>
#include <ESP8266ZabbixSender.h>
//#include "konfigurace_local.h"
#include "konfigurace.h"

#define pinKONTAKT 14
#define pinDHT 12
#define typDHT11 DHT11  

DHT cidlo(pinDHT, typDHT11);
const int measurment_delay = 60;
unsigned long lastMsg = 0;
ESP8266ZabbixSender zSender;

void setup() {
    Serial.begin(115200);
    delay(2000);
    pinMode(pinKONTAKT, INPUT_PULLUP);
    Serial.println("Start");
    WiFi.mode(WIFI_STA);
    WiFi.begin(ssid, password);
    while (WiFi.status() != WL_CONNECTED) {
        delay(500);
    }
    Serial.println("Pripojeno");
    Serial.println();
    Serial.print("MAC adresa:  ");
    Serial.println(WiFi.macAddress());
    Serial.print("IP adresa:  ");
    Serial.println(WiFi.localIP());
    WiFiClient client;
    zSender.Init(IPAddress(SERVERADDR), ZABBIXPORT, ZABBIXAGHOST);
}

void loop() {
    if (millis() - lastMsg > (1000 * measurment_delay) || millis() < (lastMsg - 1000)) {
        sendMessage();
    }
}

void sendMessage()
{   
    int kontakt = digitalRead(pinKONTAKT)? 0 : 1;
    float teplota = cidlo.readTemperature();
    float vlhkost = cidlo.readHumidity();
    Serial.print("Kontakt: ");
    Serial.println(kontakt);
    Serial.print("Teplota: "); 
    Serial.println(teplota);
    Serial.print("Vlhkost: "); 
    Serial.println(vlhkost);
    zSender.ClearItem();
    zSender.AddItem("kontakt", kontakt);
    zSender.AddItem("teplota", teplota);
    zSender.AddItem("vlhkost", vlhkost);
    if (zSender.Send() == EXIT_SUCCESS) {
        Serial.println("ZABBIX SEND: OK");
    } else {
          Serial.println("ZABBIX SEND: ERROR");
    }
    lastMsg = millis();
}